H.264/MPEG Codec Platform SOC/FIE8180(GM8180)
H.264/MPEG Codec Platform SOC/FIE8180(GM8180)
FIE8180 DEMO BOARD
FIE8180架构图 FIE8180(GM8180SF-BD) video chip with FA626 CPU core provides a high performance solution to accelerate the image and video related applications such as the H.264, MPEG4, and JPEG to the end products. FIE8180 supports both MPEG4/JPEG and H.264 encoder/decoder. It provides the cost-effective and easy development system for the integration and verification of the video application at the early development stage. The FIE8180 system platform includes a wide range of basic components to reduce the overall system cost, including the H.264 codec, video capture, 656out_gen,LCD controller, DES/3DES controller, USB 2.0 OTG controller, USB 2.0 PHY, DMA controller, PCI bridge, IDE controller, Ethernet MAC controller, and AMBA bus framework.Features: Embedded Processor Faraday FA626 Up to 450MHz ARM based 32-bit RISC ...

>> 阅读全文

Faraday Media Platform SoC FIC8120
Faraday Media Platform SoC FIC8120
FIC8120
FIC8120 单芯片内置MPEG4编解码的ARM处理器FIC8120是智原(FARADAY)科技推出的高整合度MPEG4编解码SoC平台。核心是MPEG4/JPEG视频编解码硬件引擎和功能强大的FA526 RISC 32bit CPU（ARM922）。编解码引擎支持MPEG4实时编码/解码,在编码或者解码时D1效果每秒能到30帧。此外芯片集成单片的多码流处理，处理外部控制指令，运动监测等技术。FIC8120使用了0.18微米制程，全速率下编码解码功耗只有0.6W，发热量相当低，适合环境恶劣的应用。主要特点：[CPU] FA526(arm922), 8K I-cache and 8K D-cache[MPEG4 codec] Non-Duplex @ D1, 30fps, Full-Duplex @ D1, 15 fps[PCI Interface] 2.2 compliant. Support 2-slot PCI masters,dedicated; PCI - SDRAM AHB local memory bus[Peripherals] 802.3 MAC, USB2.0 OTG, IDE Controller, SD Card Controller, UART*4, I2S/AC97, I2C, GPIO[Video Capture] CCIR 656/601* interface (support progressive & interlace)[Display Interface] CCIR 656/601*[Operati...

>> 阅读全文

快来找找你的家，非常有趣的实景地图，我甚至找我家门口的自行车http://www.city8.com/

>> 阅读全文

很早就知道的一个很强的博客，不止拜倒过一次。。。。http://hi.baidu.com/%D4%C6%C9%EE%CE%DE%BC%A3

>> 阅读全文

那天见到软件收集强帖，大家共享http://bbs.1teng.com/thread-79457-1-2.html

>> 阅读全文

OverviewThe JM20336 is a bridge controller, which translates the communication protocol between SATA II 3.0G and Hi-Speed USB commands. The integrated 15MIPS 8051, dual-port SATA II 3.0G and Hi-Speed USB technology enable users to perform Hi-Speed USB to SATA II 3.0G, and SATA II 3.0G to SATA II 3.0G applications in a signal chip.In this chip, the Hi-Speed USB controller supports the USB Mass Storage Class Bulk-Only Transport Specification, and support dual LUN applications. The SATA controller could be configured as host or device. The dual-port SATA II 3.0G controllers further support the SATA to SATA communication. Integrated these two technologies, the user could perform JM20336 to the following applications. ? SATA & Hi-Speed USB combo to SATA bridge application. (USB Default Driver of OS) ? Hi-Speed USB to SATA with dual LUN bridge application (USB Default Driver of OS) ? Hi-Speed USB to dual-port SATA with one-button copy application (With USB Vender Software ...

>> 阅读全文

OverviewThe JM20339 is single chip solution to bridge between USB 2.0 host and SATA device. The highly integrated USB 2.0 and SATA Phys technology provides a cost-effective solution to apply USB to SATA device enclosure. The USB adheres to the Mass Storage Class Bulk-Only Transport Specification. The embedded command parser supports both ATA and ATAPI command set with LBA48 bit addressing capability.
FeatureCompliance? Compliance with Gen1i, and Gen1m of Serial ATA II Electrical Specification 1.0 ? Compliance with USB 2.0 (Hi-Speed USB) electrical specification ? Compliance with USB Mass Storage Class Bulk-Only Transport Specification
Overall? Support SATA spread-spectrum transmitter ? Support SATA II Asynchronous Signal Recovery (Hot Plug) feature ? Support 480Mbps High Speed (HS) and 12Mbps Full Speed USB operation ? Support ATA/ATAPI LBA48 bit addressing mode ? Support 12MHz external crystal. ? Single-power 3.3V power supply ? 0.18um CMOS techno...

>> 阅读全文

OverviewThe JM20330 is a single chip solution for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 JM20330 supports a 1.5GHz data rate.The application layer supports both the ATA register command set and PACKET command set, which could drive both Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation and can be configured through a single pin.
FeatureCompliance? Serial ATA 1.0 Specification compliant
Overall? ATA/ATAPI PIO mode 0 to 4 ? ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s. ? ATA/ATAPI LBA48 addressing mode associated with 2-byte sector count ? Support Serial ATA hot-plug ? Ultra low power consumption ? Work for bot...

>> 阅读全文